Aluminum reflector SEALO AF 16/17 mm (145 x 1000 x 0.5 mm) / 150 mm

Aluminum reflector SEALO AF 16/17 mm (145 x 1000 x 0.5 mm) / 150 mm

Aluminum plate in the panel system:

• insert the aluminum plate into the milled passages according to the project. The distance between the plates must be at least 3-5 mm, they cannot touch each other and overlapping is not allowed
• lay the pipe in loops and connect the ends with collector fittings
• the pipe can be additionally secured to the return bends using aluminum tape, place perforated underlays under the plates: quartz mat, XPS, STEICO Underfloor, cardboard underlay, HDF
• for gluing floor coverings, additionally use a dry leveling layer
• install the final floor finish for underfloor heating

Aluminum heating plates in the beam system:

• place a double aluminum plate between the beams (best in the insulation layer)
• secure the sides of the plates to the beams with screws
• cut/mill passages in the beams to lay the pipe
• lay the pipe in loops and connect the ends with collector fittings
• lay the structural layer
• install the final floor finish for underfloor heating

Aluminum foil:

• aluminum foil is glued to the heating plates
• aluminum foil tears when pushing the pipe into the passages, there is no need to cut it
• lay perforated underlays under the plates: quartz mat, XPS, flooring, cardboard underlay, HDF. To glue the floor covering, prime the surface and insert a mesh with elastic rubber glue or use an additional dry leveling layer
• install the final floor finish for underfloor heating

Metalized foil - foil adapted to the shape and milling in the panel, adapted to the board

Yield of aluminum plates based on the spacing between pipes:

• 100 mm ~ 10 pcs/m2
• 125 mm ~ 8 pcs/m2
• 150 mm ~ 6.5 pcs/m2
• 200 mm ~ 5 pcs/m2
• 250 mm ~ 4 pcs/m2

Advantages:

• Aluminum plate wall thickness of 0.5 mm
• German quality

System parameters

• Standard plate formats length: 1000 mm x width 145 mm x aluminum thickness 0.5 mm
• Spacing between grooves 150 mm
• Pipe diameter Ø 16/17 mm
• With one groove
• Aluminum plates recommended for dry systems

Main material technical characteristics

• Fire reaction class A1
• Thermal conductivity coefficient Λ = 200 W/mK
• Class 1050A
• Condition H24

Warranty: 2 years

Manufacturer: SEALO (Germany)

Product images are for illustrative purposes only and are examples. The product description in the video link is for informational purposes only, and the information provided may differ from the product itself. The colors, inscriptions, parameters, dimensions, sizes, functions, and/or any other properties of the original products may appear differently due to their visual characteristics, so please refer to the product specifications indicated in the product descriptions. If you have any questions, please contact us via email or phone listed in the contact section.