Frezed dry system board with a turn SEALO MFP 16/17 mm (1200 x 600 x 22 mm) / 150 mm

Planed dry system board with a turn SEALO MFP 16/17 mm (1200 x 600 x 22 mm) / 150 mm

Planed MFP boards used with profiled aluminum boards or coated with aluminum foil / metallized foil

Advantages:

• construction layer
• greater durability than OSB
• load resistant
• moisture resistant
• thermal insulation
• sound insulation
• flame retardant
• vapor permeable
• resistant to mold and mildew development
• allows reducing the structural layer to 22 mm
• gaps and groove diameters are adapted for sanitary devices
• quick and easy assembly
• low ceiling load
• no need to heat the floors

Purpose:

• Water floor and wall heating (without screed – dry method)
• building renovation
• frame construction
• modular construction

Installation:

• level and clean the surface
• use expansion joints in the walls, an expansion strip can be used
• lay the boards according to the project as floating floors or fasten with wood screws
• when installing boards on beams, lay the boards perpendicular to the beams (there must be insulation between the beams, flush with them, to support the boards (maximum distance between beams – 400 mm)
• if necessary, cut the board where needed manually to cut or mill passages between rooms and near collectors
• insert aluminum boards into the milled grooves, according to the project, the gaps between the aluminum board must be no less than 3-5 mm, they must not touch each other, and overlapping is not allowed
• route the pipe in loops and connect the ends to the collector connections, the pipe can be additionally secured to the return loops using aluminum tape
• place perforated underlays
• boards: quartz mat, XPS, STEICO
• Floors, cardboard underlay, HDF
• to glue the floor covering, use an additional dry screed layer
• install the intended final floor finish for underfloor heating

System parameters

• Standard board formats: length 1200 mm x width 600 mm x thickness 22 mm
• Gap between grooves 150 mm
• Pipe diameter Ø 16/17 mm
• Aluminum boards/foil Recommended

Main material technical characteristics

• Fire reaction class Ds1-d0
• Density 740 kg/m3
• Water vapor permeability μ = 15 - 50
• Thermal conductivity coefficient Λ = 0.12 W/mK
• Specific heat capacity c = 2.1 kJ/kgK
• Tensile strength ≥ 45 N/mm2
• Swelling ≤ 10 %
• Moisture 5 - 13 %
• Acoustic insulation from airborne sound 29.0 dB
• Formaldehyde emissions E1 class

Warranty: 2 years

Manufacturer: SEALO (Germany)

Product images are for illustrative purposes only and are exemplary. Video links in the product description are for informational purposes only, and the information provided may differ from the actual product. The colors, inscriptions, parameters, dimensions, sizes, functions, and/or any other properties of the original products may appear differently than in reality due to their visual characteristics, so please refer to the product specifications listed in the product descriptions. If you have any questions, please contact us via email or phone listed in the contact section.